ELIAH offers more convenience
Replace lamp and
Enjoy light & warmth
Simply replace the existing ceiling light with ELIAH and then activate light and heat on the existing light switch as required. Retrofitting a fixed and fast on-demand heating system couldn’t be any more convenient.
No other device can do this and therefore a patent has been applied for ELIAH!
ELIAH integrates a complete local space heater in an LED ceiling light, fully compliant with the current regulation 2015/1188 of the European Commission for the implementation of the Ecodesign Directive. The central positioning in the middle of the room enables the heat to be quickly distributed in all directions. In addition, a warm feel-good zone quickly forms in the middle of the room.
ELIAH is only 115 mm high, which corresponds, for example, to the length of an 11 watt LED light bulb with an E27 socket. Thanks to its low height and timeless design, ELIAH really fits into any room.
Upgrade your existing light switch
One click turns on the LED light. Two more clicks turn on the heating. With a little practice, you can turn on lights and heat in less than 1.5 seconds. Much faster than with an additional remote control and a real upgrade of your existing light switch.
Additional programs are called up by switching the device off and then on again within five seconds. Up to eight different programs, plus two additional programs (hair dryer and temperature monitor) can be individually configured and accessed via the light switch. With one more click you can easily switch ELIAH off, just like any other lamp. The intuitive operation is easy to learn and ideal for young and old.
Don’t you feel like operating the light switch multiple times every day? No problem, configure ELIAH so that the most recently used program is always retrieved. The multiple actuation is then only used for seasonal switching of the programs.
Multiple switching
With this symbol you know that the functionality of the simple light switch has been expanded to include multiple circuits.
An idea that has already been implemented elsewhere for the implementation of step dimmers now enables the simplest program selection to meet your individual wishes for light and warmth.
Easy to retrofit, resource-saving and easy to use.
More than just light
ELIAH ensures your personal feel-good light in every situation. Whether bright light for putting on makeup or dimmed light for relaxing in the bathtub. The integrated step dimmer enables the configuration of suitable programs for every situation. The “hybrid dimming” of the LEDs ensures a relaxed and flicker-free desired brightness of 1 %. up to 100 %. The maximum brightness of over 3400 lumens is also sufficient to illuminate large bathrooms nicely. The color rendering index RA of more than 90 (type 92) ensures beautiful color rendering and good contrasts.
ELIAH can be configured so that the LED light starts with one percent of the maximum brightness after switching on and then slowly becomes brighter and only reaches the set brightness after a configurable number of seconds (1 – 60). This gives your eyes a few seconds to get used to the light in the morning, or you can select a night light program with only low brightness.
ELIAH moves with the times
Timing controls are an important part of ELIAH. The heating switches off after a configurable time if the device is forgotten. Spans of a few minutes for the guest toilet are just as possible as several hours, for example for the basement office at home.
In addition, the light can also be linked to the existing timer, so that the lighting function is also automatically terminated. Ideal for bathrooms or basements, in which the light is often forgotten. So that you are not immediately in the dark, the device slowly dims the light to the lowest level and informs you of the impending switch-off by gently dimming up and down.
Would you like to have your bathroom warm when you enter it in the morning? For this purpose, ELIAH is connected via a changeover button, which permanently supplies the device with power (button normally closed). Programmable weekly timers are now available, or the clever Easy-Timer, whereby the time can be programmed using the light switch (start of use on the following day at the same time).
More freedom for you
ELIAH gives you maximum freedom in designing your bathroom. Design your walls independently of the need for heating or their requirements in terms of power supply or the additional space so as not to block the heated exhaust air. The visual impression of the required heating is reduced to a minimum. Of course, there is also no risk of knocks and tripping that mobile heating solutions bring with them.
And if the warm seasons do not require demand heating, you will have forgotten that your room is equipped with it.
Innovative
Configuration options
ELIAH supports you with innovative configuration options. For use in the bathroom, for example, there is the hairdryer mode. Here the device heats for an adjustable time at full heat level, either to dry your hair or so that you can enjoy a nice, warm stream of air after the shower.
The maximum heating output can be set in percentage steps between 50% and 100%. In this way, you can choose the ideal compromise between heating power and operating volume for your application. As a rule, a power of 2300 watts or more can be taken from the ceiling installation for lights, if this is not the case, the maximum power consumption can also be 1200 watts or only 800 watts be reduced. This is still enough heating power for small toilets or bathrooms.
The integrated temperature monitor can also be used without using a changeover button (normally closed). If the temperature monitor is activated, it starts after a heating program has elapsed, or it can be selected manually on the light switch. ELIAH is perfect for retrofitting a temperature monitor in the winter garden, garage or basement.
Always ready to go
ELIAH is always immediately available if you notice that your bathroom or home office is too cool for you. Forget about looking for your wall heating remote control only to find out that its batteries are dead. The search for the mobile fan heater that has once again left its last known location is also over. By mounting it on the ceiling, ELIAH’s supply and exhaust air paths are always free and your required heating is immediately ready for use. The device heats up just 10 seconds after starting a program for light & warmth.
The scene configuration allows up to 8 programs, which you can call up via the light switch. 3 programs are preconfigured. You can set the following for each program:
- Brightness 0% – 100%
- Heating 15 ° C – 35 ° C
- Duration of the heating function from a few minutes to 12 hours
- Circulating air 30% to 100% intensity, which means that the heating function is ignored